Depending on the finish that is required, the cost varies depending on the size of the car, the complexity of areas that require wrapping ( i.e. spoilers, skirt and bumpers) and the colour and finish that you choose.

Please make use of our "GET QUOTE" form for us to quote you accordingly, attach some photos of your vehicle if possible.

We will need your car for at least two days and up to 6 days to complete a standard external wrap, depends on vehicle size and complexity. This will allow us time to clean and prepare the car, removing any exterior items like lights, door handles and badges. Once wrapped, we then quality check and ensure that the wrap meets the standard before notifying you it is ready for collection. 

We endeavour to use only the best available vehicle wrapping films, and specify material dependent on the requirements of each individual project. Our preferred materials are manufactured by 3M, Oracal, Avery Dennison, and Arlon.

Definitely, and this is a key benefit of vehicle wrapping vs painting. At any time during the future, the wrap film can be removed to reveal the car’s original paintwork.

However, the ease of removal is highly dependent on the quality of the existing body paintwork, paint damage may occur on cheap respray and repaired paintwork, original undamaged body paint will not have such issue.

During the application process, our technicians are careful not to damage the paintwork of your car, and we do not cut material directly on the paintwork. The films that we use will not directly damage the car's paintwork, however you did need to ensure that your vehicle's paintwork is good and in original manufactured quality.

Although we use only premium grade wrap films, manufactured by companies like 3M, Oracal, Avery Dennison, and Arlon. The life of your vehicle wrap is determined by the condition of the car, how it is treated during its life and cleaning methods. Taking all of this into account, you should expect up to 5 years of life from your vehicle wrap. 

The colour of the wrap films we use should last up to 4~7 years, depends on your choice of brands and finishing unless specially stated, so there won’t be any noticeable fading during this period. 

We provide 1 year warranty on any workmanship defects for our colour change wraps, warranty on Vinyl defects however, is dependent on brand, colour and finish required. Terms & Conditions apply.

We can apply the wrap over areas that are lightly stonechipped, which is usually the front of the car, including the bumper, bonnet and wings. However, this can cause problems upon removal of the wrap, as the damaged paint lacquer can sometimes lift with the wrap film, and you do need to bear this in mind beforehand.

Depending on the quality of the repair work, this can also cause problems. Quite often, accident repairs, and especially the painting process, are not carried out to the original manufacturers exacting standards. We cannot offer any from of guarantee against paint or lacquer lift during the removal of a wrap unless we have provided this in writing prior to the wrap being applied. 

We recommend that you wash your car either by hand or using a jet wash. We advise against mechanical car washes, as the abrasive action can have a negative effect on the wrapping film. Always take care when using chemicals or detergents to clean your car. 

Usually, polish is only needed when your car wrap is built up with stubborn stains, it is advised that you bring your car back to us because we use a special vinyl-safe compound for for our polishing job. And at additional charge, we can even put a water beading coat on your car at additional charge to give your wrapped vehicle a waxed and water beading/repelling effect for easier cleaning.

As standard, we only provide exterior color change wrap. This means that when the car is parked or being driven, the exterior paintwork of the car is fully wrapped in the colour and finish of your choice. Door shuts, and interior areas are not wrapped as standard, but can be for an additional cost.

We have premium vehicle wrap vinyls of carbon fiber, brushed metal, metallic and even chrome finishing, you're recommend to stop by our garage to have a look at the samples.

The cost varies depending the protection vinyl's brand and the size and the complexity of item required wrapping.

Please make use of our "GET QUOTE" form for us to quote you accordingly, attach some photos of your vehicle if possible.

We use only the best available protection films, manufactured by Mactac 3M and Oracal. We utilize 3M's VentureShield and Mactac's CP150 as premium protection wrap, and Oracal's Oraguard 270 as a cheaper protection solution.

Our protection films serve as Paint Protection against sand abrasion, stone chip damages, bug acids and UV to keep your vehicle from discoloring and in best condition.

We recommend applying protection films on the front portions of the vehicle which include: front hood, side mirrors, fenders, bumper, and most importantly, the headlamps. Where the stone chips will most likely hit.

Depending on the quality of the repair work, this can also cause problems. Quite often, accident repairs, and especially the painting process, are not carried out to the original manufacturers exacting standards. We cannot offer any from of guarantee against paint or lacquer lift during the removal of a wrap unless we have provided this in writing prior to the wrap being applied. 

The cost varies depending on the size and complexity of the required design, please make use of our "GET QUOTE" form, briefly describe what you need and where to apply, it would be helpful if you could attach a rough draft or a picture for reference. 

We do not practice catalog system. We provide custom design service for every client according to their preference. Let us know if you have an idea you would like to present, or have us suggest you the design best suit you and your car. A deposit is required before the commencement of our design work, and a visual draft will be prepared on photos of your car for confirmation before the installation.

Depends on the complexity of the designed decals, a simple stripe on vehicle's sides should take about one hour and a complicated full body decals may take more than one day. As for design work, we may be able to create a visual of simple stripe decals for you on the spot, however, it is highly dependent on our workflow, a customized design usually required 1 to 3 days.